Transdermal Scanner  Devices

Older Generation Devices …  Still in Use today

We carry what we believe to be best Selection of Transdermal Scanners from Let Medical, RITM and AcuScen.  With these devices you can adjust almost any part of  the waveform.  When Dr. Karasev created the D.O.V.E. which has the “truest waveform” he included a few elements of the COSMODIC (the next evolutionary step). The DOVE is not fully COSMODIC because it does not contain “microresonance”.  One of the biggest changes is that the waveform of the DOVE has been altered from the conventional waveform to more accurately reflect what the body sees as it’s own communication signal.  It is a wonderful home unit.

 

The D.O.V.E. 

The DOVE has some features of the Cosmodic but is not fully Cosmodic. 

  

                       

Small, handheld, easy to use, affordable and with LET Medical's "Cosmodic  Technology"

'D.O.V.E.' stands for the Device Organizing Vital Energy - and that's precisely what it does. It is designed to help balance the flow of energy in the body and help the body to better "understand" itself, identify and restructure its priorities - and re-organize and re-balance itself for working with higher efficiency. There is nothing more powerful than well organized energy.

The D.O.V.E.is the newest, Transdermal Scanner device. The D.O.V.E. interacts with the body differently than previous devices in that its signals are distorted on purpose so they reflect more exactly the signals the body uses for internal communication and not the signals as detected by electronic means after the signals have exited through cellular tissue.  The result is a much faster adaptive response and one that is felt more "globally" than "locally" as with earlier technologies. 

Developed to Dr. Irina's specifications by Dr. Karasev's team at LET Medical, this device rated very, very high on "Julie's Test".

 

Recommended Batteries for the D.O.V.E. :

Duracell Photo Ultra Model CR123A

Sanyo Photo Lithium 3V, Advanced Lithium II CR123A

 

D.O.V.E. Operation Summary for our new users:

Operating the "D.O.V.E."

 

To turn your ‘D.O.V.E.’ on, move to the left a little switch on the side of the machine. You will see that all four light indicators on the front panel briefly lit up – and then stabilize on the first green light, which will stay on signifying that your device is now ready to work. This light is marked with the letters ‘EN’ (stands for ‘Energy’). It will change its brightness and color tone as you change the energy level on your machine (that is achieved by pressing ‘+’ (‘more’) or ‘-‘ (‘less’) buttons on top of the light indicators). To turn the ‘D.O.V.E.’ off, move the switch to the right position. Light indicators will turn dark now.

The ‘D.O.V.E.’ has four action modes:

 

-          ‘Constant’ action mode is a default mode, which turns on automatically as soon as you turn on your machine. In this mode, electrical impulses flow uninterruptedly and the device automatically determines the energetic activity of the treated area. As soon as you place the device on the skin, all four light indicators will be engaged: the first ‘EN’ light will stay constantly green (showing that the ‘Constant’ action mode is on) and three other indicators (M1, M2, M3) will be blinking irregularly (blue or yellow lights) showing the energy activity of the area. This will be accompanied with the corresponding brief sound signals. The more frequent are those signals and the flashing of light indicators, the higher is the energetic activity in the area (hence, the more beneficial for treatment it is).

 

If you leave the activated ‘D.O.V.E.’ on the skin without moving it, you will soon observe that one after another all four light indicators are turning steadily green. The moment all four turn green is accompanied with the long sound, indicating that the ‘Dose’ has been achieved.* You can now move to the different location.

 

 

-          Three ‘Modulated’ modes M1, M2 and M3, designated for specific types of electro-massage, in which the time of influence is modulated:

 

M1 – active influence 0.5 sec. followed by 0.5 sec. pause. This mode is excellent for cosmetic procedures, especially on the face and neck. (More for small muscles, blood vessels, skin improvement)

M2 – active influence 2 sec. followed by 1 sec. pause. This action mode is often used for cosmetic procedures on the chest, abdomen, buttocks and extremities. ( Improvement of microcirculation, reduction of inflammation, and swelling)

M3 – active influence 3 sec. followed by 1 sec. pause. This is the most powerful myo-stimulation mode, applied for stimulation of large muscle groups (for example, performing the ‘Little Wings’ technique) and paralyzed muscles. ( Used for muscle toning, on abdomen- improved peristalsis (digestion) , muscle contraction)

Of course, the three Modulated modes have many other applications (besides mentioned), which can be explained more during training seminars.

 

In order to turn on Modulated modes, activate ‘>’ and ‘<’ buttons on the front panel of the device. The ‘>’ button will move the device consequently from M1 to M2 to M3, and the ‘<’ – in the reversed order. While the desired action mode is selected (the corresponding light indicator shines green), you have 3 sec. to activate this mode, which you can do by pressing the ‘+’ button. If the selected mode has been successfully activated, the light indicator will turn from green to blue (or yellow). It will take another 3 sec. for the device to fully acquire the working condition, which will be indicated by blinking of the ‘EN’ light indicator with the frequency of the selected mode. 

 

To disengage the selected mode, press the ‘>’ button until it shows, which mode is activated (the corresponding light indicator will be blue or yellow, while other are green) – and then within 3 sec. press the ‘– ‘ button. The light indicator will turn green, which will signify successful deactivation of the mode. Your device now is in the default Constant mode, unless you select another Modulated mode in the previously described manner.

 

Modulated modes do not have sound indication and do not give you the Dose.

 

If you need to quickly asses the current condition of your ‘D.O.V.E.’, briefly press the ‘<’ button – it will show you for 1 sec. the state of all modes simultaneously.

 

Pressing ‘+’ or ‘– ‘ button simultaneously with the ‘>’ button turns the sound indication on or off.

 

Pressing ‘>’ and ‘<’ buttons simultaneously blocks all buttons and indicators until the device is turned off.

 

RITM started its development as part of a joint venture with Karasev to sell this technology in Europe.

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

        

  FEATURES                   RITM Professional                                                                       RITM  Home

  Large Screen Display         YES                                                                                              NO

  Accessory Probes               YES                                                                                               YES

  Fully Adjustable Settings   YES                                                                                               NO (Minimum Set) 

  Frequency Modulation       YES (15 - 350 Hz ), Sw1                                                               YES  (30 - 120 Hz)

  Automatic Dose Alarm      YES                                                                                                YES

  Amplitude Modulation       YES (1-5:1, 1-5:1, Bee Sting)                                                       YES (1-3:1)

  Powered by                         3 x AAA                                                                                        1 x 9V 

 

  

Available Probes for Either RITM Professional and/or Home device:

Comb Probe, Small Area (Face) Probe, Acu-Pen Probe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Two AcuScen models are available, a professional and a home version.

 

Modes of Operation       AcuScen Professional         AcuScen Home  

 

Auto Mode (dose)                     YES                            YES

Highly Effective and simple to use alarm lets you know when a “dose” is completed.

 

Manual Mode                            YES                            YES

All functions are settable.

 

Scan Mode                                 YES                             NO

Helps to locate areas of “small asymmetry areas with high or low bio-impedance. 

All settings are fully adjustable. Numbers remain on the display after the AcuScen

is off the skin so it is easier to take readings in hard to reach areas.

 

Large Display Screen                 YES                           YES

Attachments/Probes                    YES                          YES

 

Available Probes for Either AcuScen Professional and/or Home device:

 

   

 Ball Electrodes, for large and small muscles, Acu-Point, Hair(Comb), and Facial Probe

 

 

  NeuroPaths

Phone 512-377-1341

  Modalities for Relaxation & Peak Performance